706-855-8001
The following are thermal images of
testing a SWR Wolverine Silencer
fitted to an M16
This is the baseline
visual spectrum picture.
This is the baseline thermal
spectrum picture. This is
prior to shooting the M16.
The rifle appears in the
ambient state.
M16 after 20 shots
M16 after 30 shots, notice how the
upper receiver is heating up from
the chamber to the rear.
3/4th view after 30 shots notice how
hot the Silencer has become
The center of the can in this view was
reported to be 307.6 degrees F
Top view of the hand guards, you can
see the vent holes very clear.
Below are thermal reports with
gradients in the X and Y axis from the
center point specified.
The silencer temp in the center
indicates 276.2 Degrees F. Way
too hot to touch after 30 rounds
Several points with temperature
indications in Degrees F
click picture to see a larger view
Click picture for a larger view
The following are thermal images of
testing a SWR Warlock Silencer fitted
to an Walther P-22
This is the baseline thermal
spectrum picture. This is prior
to shooting the P-22. The pistol
is in the ambient state.
This is after 30 shots  
Click the picture for a
larger view.
This is a thermal report
with gradients in the X
and Y axis from the
center point
specified.Click the
picture for a larger view